These vertically retracting VIP thrusters use a unique and patented thrust plate design. The VIP 250, is available in 24V and is ideally suited to high-performance sailing yachts and super fast motor yachts 40’-60’.
| Installation Manual (EN) |
| VIP 250 Technical Drawing |
| Code | Voltage | Thrust | Propellers | Power | Weight |
|---|---|---|---|---|---|
| 35043 | 12V | 145 / 319 | Duo | 9.5 / 12.74 | 54(kg) |
Max Power’s vertically retracting VIP thrusters use a unique and patented thrust plate design. The largest electric thruster in the Max Power range, the VIP 150 is available in both 12V and 24V and is ideally suited to high performance sailing yachts and super fast motor yachts 40-60’.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 35023 | 12V | 96(kg) / 212(lbs) | 2 | 7.1(kw) / 9.5(hp) | 40(kg) | 330(mm) | 290(mm) | 710(mm) | 185(mm) | 240(mm) |
| 35024 | 24V | 115 (kg) / 254(lbs) | 2 | 8.56(kw) / 11.5(hp) | 40(kg) | 330(mm) | 290(mm) | 710(mm) | 185(mm) | 240(mm) |
Designed for yachts from 9 to 16 metres (30-52’). This lightweight electric retractable thruster, the first of its kind, has been a major success with shipyards from the start. The compact retract is delivered complete with grey joystick, control system cable and support.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317821 | 12V | 70(kg) / 154(lbs)' | 2 | 4.79(kw) / 6.4(hp) | 40(kg) | 555(mm) | 388(mm) | 385(mm) | 185(mm) | 241(mm) |
| 317822 | 24V | 85(kg) / 187(lbs) | 2 | 5.28(kw) / 7.1(hp) | 40(kg) | 555(mm) | 388(mm) | 385(mm) | 185(mm) | 241(mm) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 225 Product Data Sheet |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317633 | CT225 | 14 - 22(m) / 45 - 73' | 24V | 195(kg) | 15(kw) / 25(hp) | 61(kg) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 165 Product Data Sheet |
| 3D Models Pod 165 |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317632 | CT165 | 12 - 20(m) / 40 - 66' | 24V | 160(kg) | 11.9(kw) / 15.6(hp) | 61(kg) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 125 Product Data Sheet |
| 3D Models Pod |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317631 | CT125 | 10.5 - 18(m) / 34 - 59' | 24V | 115(kg) | 8.6(kw) / 11.5(hp) | 41(kg) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 100 Product Data Sheet |
| 3D Models Pod 100 |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317630 | CT100 | 9.8 - 15.5(m) / 32 - 51' | 12V | 96(kg) | 7.1(kw) / 9.5(hp) | 41(kg) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 80 Product Data Sheet |
| 3D Models Pod 80 |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317628 | CT80 | 8.5 - 14(m) / 28 - 46' | 12V | 69(kg) | 4.8(kw) / 6.4(hp) | 31(kg) |
| 317629 | CT80 | 8.5 - 14(m) / 28 - 46' | 24V | 75(kg) | 5.3(kw) / 7.1(hp) | 31(kg) |
The Max Power Stern Pod offers an innovative solution to the often difficult taks of installing a thruster into the stern of modern motor yachts. Combining a dry area on the stern with correct immersion depth and sufficient access is often a challenge. Designed with these constraints in mind, Stern Pod units can be installed entirely from the outside of the transom, reducing greatly the need for inside access. This allows greater immersion depth to be achieved.
The Stern Pod housing is waterproof and ignition protected (ISO 8846) designed to withstand the corrosive damp atmsphere of the bilge. Entirely assembled and tested in our factory, Stern Pod units guarantee long term trouble-free opertion with only minimal maintenance care.
| Installation Manual (EN) | Pod 45 Product Data Sheet |
| 3D Models Pod 45 |
| Code | Model | Boat Size | Voltage | Thrust | Power | Weight |
|---|---|---|---|---|---|---|
| 317625 | CT45 | 6 - 10.5(m) / 20 - 34' | 12V | 45(kg) | 3.2(kw) / 4.3(hp) | 21(kg) |
The HYD 325/325 is designed for motor boats and deep footed sailing yachts ranging from 52’-90’. The largest in the hydraulic tunnel thruster range, this twin propeller model has a 185mm diameter tunnel and is available in bronze only. Two different power options offer a thrust rating of up to 250/550 (kg/lbs) or 275/606(kg/lbs).
| Code | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|
| 317598 | 250(kg) / 551(lbs) | 2 | 14(kw) | 24(kg) | 240(mm) | 240(mm) | 240(mm) | 315(mm) | 9 - 10(mm) |
| 317599 | 275(kg) / 606(lbs) | 2 | 20(kw) | 24(kg) | 240(mm) | 240(mm) | 240(mm) | 315(mm) | 9 - 10(mm) |
The CT HYD 300 is designed for motor yachts and deep footed sailing yachts ranging from 45’-70’. Manufactured using composite materials, this twin propeller model has a 250mm diameter tunnel, a thrust rating up to 225/495 (kg/lbs) and integrates all the unique features of the hydraulic tunnel thruster range.
| Installation Manual (EN) |
| CT HYD 300 Drawings |
| Code | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|
| 317607 | 240(kg) / 529(lbs) | 2 | 24(kg) | 24(kg) | 240(mm) | 240(mm) | 240(mm) | 300(mm) | 9 - 10(mm) |
The CT HYD 225 is designed for motor yachts and deep footed sailing yachts ranging from 45’-70’. Manufactured using composite materials, this twin propeller model has a 250mm diameter tunnel, a thrust rating up to 225/495 (kg/lbs) and integrates all the unique features of the hydraulic tunnel thruster range.
| Code | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|
| 317591 | 200(kg) / 441(lbs) | 2 | 13.5(kw) | 19(kg) | 220(mm) | 220(mm) | 220(mm) | 250(mm) | 7 - 8(mm) |
The CT HYD 125 is designed for motor yachts and deep footed sailing yachts ranging from 35’-57’. The smallest in the hydraulic tunnel thruster range, the twin propeller CT HYD 125 is fabricated using composite materials, has a 185mm diameter tunnel, a thrust rating up to 125/275 (kg/lbs) and integrates all the unique features of the range.
| Code | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|
| 317588 | 140(kg) / 308(lbs) | 2 | 13.5(kw) | 12(kg) | 210(mm) | 210(mm) | 215(mm) | 185(mm) | 6 - 7(mm) |
| 317589 | 90(kg) / 198(lbs) | 2 | 7.5(kw) | 12(kg) | 210(mm) | 210(mm) | 215(mm) | 185(mm) | 6 - 7(mm) |
| 317590 | 120(kg) / 264(lbs) | 2 | 11(kw) | 12(kg) | 210(mm) | 210(mm) | 215(mm) | 185(mm) | 6 - 7(mm) |
CT550 is ready to enlarge the range of MAX POWER Tunnel Thrusters for boats up to 45m. All parts that are in the water are designed with best hydrodynamic profile to avoid turbulence. It is the most powerful tunnel thruster in D400 tunnel size with 4 blade propellers in metallic material to guarantee maximum thrust performance. Counter rotating system offers higher efficiency on thrusting with left side and right side pitch props in order to have same results in both directions.
| Code | Thruster Power (kw) | Motor Power (cc/kw) | Tunnel Diameter (mm) | Pressure | Flow | Propellers | Weight | Light Duty Thrust (KgF) | Light Duty Thrust (KgF) | Application (Boat Size - m) |
|---|---|---|---|---|---|---|---|---|---|---|
| 636211 | Min 42 - Max 50 | 40 | 400 | Min 210 - Max 250 | 120 | Four Blade, DUO Counter Rotating | 65 | 630 | 560 | 6 - 7(mm) |
Max Power offers a complete range of 12V/24V electric tunnel thrusters to suit motor boats and deep footed sailing yachts from 17’ to 85’ feet.
The 24V CT125-IP is the largest Ignition Protected tunnel thruster in the Max Power range with a 185mm diameter tunnel and a thrust rating of 117/257 (kg/lbs). This high performance thruster is suitable for motor boats and deep footed sailing yachts ranging from 35’-58’. Offering all the unique features of the Max Power Ignition Protected tunnel thruster range, this model is ideal where extra thrust power is required.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317616 | 24V | 115 / 254 (kg/lbs) | 2 | 8.58 / 11.5 (kw/hp) | 27.2(kg) | 390(mm) | 305(mm) | 490(mm) | 185(mm) | 6 - 7(mm) |
The 12V, twin propeller CT100-IP suits a wide range of motor boats and deep footed sailing yachts ranging from 30’-53’. This composite Ignition Protected thruster has a tunnel diameter of 185mm and a thrust rating up to 90/198 (kg/lbs). The CT100-IP, like all Max Power Ignition Protected tunnel thrusters, is maintenance free, benefits from a long lifespan and integrates all the unique features of this range.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317615 | 12V | 96 / 212 (kg/lbs) | 2 | 7.1 / 9.5 (kw/hp) | 27.2(kg) | 390(mm) | 305(mm) | 490(mm) | 185(mm) | 6 - 7(mm) |
Available in 12V or 24V, the CT80-IP is perfectly suited to motor boats and deep footed sailing yachts in the popular 25’-44’ size range. With its 185mm tunnel diameter and thrust rating of up to 65/143 (kg/lbs) on the 12V model, or 80/176 (kg/lbs) on the 24V model, this powerful yet economic thruster integrates all the unique features common to the range.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317613 | 12V | 69 / 152 (kg/lbs) | 2 | 4.79 / 6.4 (kw/hp) | 17.6(kg) | 320(mm) | 255(mm) | 375(mm) | 185(mm) | 6 - 7(mm) |
| 317614 | 24V | 75 / 165 (kg/lbs) | 2 | 5.28 / 7.1 (kw/hp) | 17.6(kg) | 320(mm) | 255(mm) | 375(mm) | 185(mm) | 6 - 7(mm) |
Available in 12V or 24V, the CT60-IP is suited to motor boats and deep footed sailing yachts between 20’-40′. Manufactured using composite materials, the CT60-IP is a single propeller thruster with a 185mm diameter tunnel and thrust rating up to 60/132 (kg/lbs) on the 12V model, or 60/143 (kg/lbs) on the 24V model. Integrating the unique features common to the Max Power Ignition Protected tunnel thruster range, the CT60-IP is easy to install and connect.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317611 | 12V | 58 / 128 (kg/lbs) | 1 | 4.35 / 5.8 (kw/hp) | 17.3(kg) | 320(mm) | 255(mm) | 375(mm) | 185(mm) | 6 - 7(mm) |
The CT45-IP is ideal for motor boats and deep footed sailing yachts ranging from 19’-36′. Manufactured using composite materials, the CT45-IP has a 125mm diameter tunnel.
As small and compact as the CT35-IP, the CT45-IP benefits from an increased thrust rating up to 40/88 (kg/lbs) thanks to its twin propellers. Easy to install and maintenance free, this model integrates all the unique features common to Max Power’s Ignition Protected tunnel thrusters.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317610 | 12V | 30 / 88 (kg/lbs) | 2 | 3.23 / 4.3 (kw/hp) | 11.65(kg) | 301(mm) | 230(mm) | 295(mm) | 125(mm) | 4 - 5(mm) |
Tunnel bow thrusters are highly cost effective and easy to fit on many boat types. When installed at the correct immersion depth and using the shortest tunnel length possible, tunnel thrusters offer an ideal solution for motor boats and even deep-footed sailing yachts when sailing performance is not paramount.
The smallest in the Max Power Ignition Protected tunnel thruster range, the CT35-IP is ideally suited to motor boats and deep footed sailing yachts ranging from 17’ to 34′.
Manufactured using composite materials, the CT35-IP is a single propeller thruster with a 125mm diameter tunnel and thrust rating of up to 35/75 (kg/lbs).
Like all Max Power Ignition Protected tunnel thrusters, the CT35-IP is easy to install, maintenance free, and integrates all the unique features common to this range.
Ignition protected thrusters are ideal for motor boats. Their unique feature is the totally sealed housing around every electric part. This feature provides optimal ignition protection because it doesn’t allow any fuel fumes enter the electric parts and cause spark ignition. In addition, the sealed housing prevents water and humidity from entering the electric parts area and keeps it dry.
Ignition Protected and water resistant.
Easy to connect thruster. Robust metallic frame.
Unique composite drive leg design.
High specification electric motors.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317609 | 12V | 35 / 77 (kg/lbs) | 1 | 2.69 / 3.6 (kw/hp) | 11.6(kg) | 301(mm) | 230(mm) | 295(mm) | 125(mm) | 4 - 5(mm) |
The CT225 is the most powerful 250mm diameter electric tunnel thruster on the market, with a thrust rating up to 200/440 (kg/lbs), and is also the largest composite thruster in the Max Power electric tunnel thruster range.
Suitable for motor yachts and deep footed sailing yachts ranging from 44’-68’ this model is fitted as standard on large variety of yachts.
Offering all the unique features of the range this twin propeller model is ideal where extra thrust power is required.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 42542 | 24V | 255(kg) / 562(lbs) | 2 | 19.69(kw) / 26.4(hp) | 59(kg) | 250(mm) | 250(mm) | 480(mm) | 315(mm) | 9 - 10(mm) |
The largest and most powerful model in the Max Power electric tunnel thruster range, the CT300 is suitable for motor yachts and deep footed sailing boats from 52’ up to 90’.
Designed for use with the popular 300mm tunnel diamter, this electric tunnel thruster is a direct replacement for older less powerful units.
| Installation Manual (EN) |
| Troubleshooting |
| 3D Models CT 300 |
| CT 300 Drawings |
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317606 | 24V | 255(kg) / 562(lbs) | 2 | 19.7(kw) / 26.4(hp) | 58.5(kg) | 250(mm) | 250(mm) | 480(mm) | 300(mm) | 9 - 10(mm) |
The CT225 is the most powerful 250mm diameter electric tunnel thruster on the market, with a thrust rating up to 200/440 (kg/lbs), and is also the largest composite thruster in the Max Power electric tunnel thruster range.
Suitable for motor yachts and deep footed sailing yachts ranging from 44’-68’ this model is fitted as standard on large variety of yachts.
Offering all the unique features of the range this twin propeller model is ideal where extra thrust power is required.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317558 | 24V | 195(kg) / 430(lbs) | 2 | 14.96(kw) / 20(hp) | 37(kg) | 270(mm) | 200(mm) | 405(mm) | 250(mm) | 7 - 8(mm) |
The 24V CT165 is ideally suited to motor boats and deep footed sailing yachts ranging from 40’-62’. Manufactured using composite materials, this model has twin propellers, a 250mm diameter tunnel and a thrust rating up to 160/352 (kg/lbs).
This model integrates all the unique features of the Max Power electric tunnel thrusters range, ensuring a long and maintenance free lifespan.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 317557 | 24V | 160(kg) / 353(lbs) | 2 | 11.88(kw) / 15.9(lbs) | 36(kg) | 250(mm) | 200(mm) | 430(mm) | 250(mm) | 7 - 8(mm) |
The 24V CT125 is the most powerful 185mm diameter tunnel thruster on the market with a 117/257 (kg/lbs) thrust rating.
This high performance thruster is suitable for motor boats and deep footed sailing yachts ranging from 35’-58’.
Offering all the unique features of the Max Power electric tunnel thrusters range this model is ideal where extra thrust power is required.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 42535 | 24V | 115 (kg) / 254(lbs) | 2 | 8.58(kw) / 11.5(hp) | 24(kg) | 250(mm) | 200(mm) | 365(mm) | 185(mm) | 6 - 7(mm) |
The 12V, twin propeller CT100 suits a wide range of motor boats and deep footed sailing yachts ranging from 30’-53’. This composite thruster has a tunnel diameter of 185mm and a thrust rating up to 90/198 (kg/lbs).
The CT100, like all Max Power electric tunnel thrusters, is maintenance free, benefits from a long lifespan and integrates all the unique features of this range.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 42534 | 12V | 96(kg) / 212(lbs) | 2 | 7.1(kw) / 9.5(hp) | 24(kg) | 250(mm) | 200(mm) | 365(mm) | 185(mm) | 6 - 7(mm) |
This composite, twin propeller, DC tunnel thruster is undeniably the best selling model in the Max Power electric tunnel thruster range. Available in 12V or 24V, the CT80 is perfectly suited to motor yachts and deep footed sailing yachts in the popular 25’-44’ size range.
With its 185mm tunnel diameter and thrust rating up to 65/143 (kg/lbs) on the 12V model, or 80/176 (kg/lbs) on the 24V model, this powerful yet economic thruster integrates all the unique features common to the range and is fitted as standard on a large variety of yachts.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 42532 | 12V | 69(kg) / 152(lbs) | 2 | 4.79(kw) / 6.4(hp) | 15(kg) | 210(mm) | 140(mm) | 275(mm) | 185(mm) | 6 - 7(mm) |
| 42533 | 24V | 75(kg) / 165(lbs) | 2 | 5.28(kw) / 7.1(hp) | 15.1(kg) | 210(mm) | 140(mm) | 275(mm) | 185(mm) | 6 - 7(mm) |
Available in 12V or 24V, the CT60 is suited to motor boats and deep footed sailing yachts between 20’-40′.
Manufactured using composite materials, the CT60 is a single propeller thruster with a 185mm diameter tunnel and thrust rating up to 60/132 (kg/lbs) on the 12V model, or 60/143 (kg/lbs) on the 24V model.
Integrating the unique features common to the Max Power electric tunnel thrusters range, the CT60 is fitted as standard on a large variety of yachts.
| Code | Voltage | Thrust | Propellers | Power | Weight | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|---|---|
| 42530 | 12V | 58(kg) / 128(lbs) | 1 | 4.35(kw) / 5.8(hp) | 14.7(kg) | 210(mm) | 140(mm) | 275(mm) | 185(mm) | 6 - 7(mm) |
| 42531 | 24V | 63(kg) / 139(lbs) | 1 | 4.4(kw) / 5.9(hp) | 14.8(kg) | 210(mm) | 140(mm) | 275(mm) | 185(mm) | 6 - 7(mm) |