Select Page

Hydraulic Steering System LS 80 PRO

For Outboard Motors up to 80 HP/ Port to Starboard: 3.5 turns
Contact us for boat speed exceeding 40 knots and for 40 / 50 hp Suzuki motors.

Standard Kit

2200804Pump 20 HB with lock valve
2203315Cylinder VHM EX 80 HP + fittings
2201989Set of elbow pump fittings Ø 6
120426810 metres of flexible tube Ø 6
2203853OB Filling kit

Dimension Drawings

2203315 Cylinder VHM EX 80 HP + fittings
Weight : 2.3 Kg
Volume : 70 cc
Stroke : 206 mm
2203315 Dimension Drawing

2200804 Pump 20 HB with lock valve
Weight : 2.8 kg
2200804 Dimension Drawing

We have a full range of accessories including:

  • Tie Rods for Outboard Steering
  • Equipped Grease Nipple
  • LS Speedy Purge
  • Adapter Kit for Honda Motors
  • Pump Bezel
  • Set of Fitting for Evirude E-TEC G2
  • Cut Back Bracket for LS Cylinder VHM 125/175/225 HP
  • VHM 80/125 HP Set of Bullhorns for Suzuki
  • Bulkhead Strain Relief
  • Sets of Fittings for Flexible Tubes
  • Sets of Straight Fittings for Inflexible Tubes
  • Sets of Tees Flexible Tubes
  • Sets of Tees for Inflexible Tubes
  • Fittings for Flexible Tubes
  • Flexible Tubes for Crimp Connections
  • Flexible Tubes with pre-crimped Fittings + Bulk Strain Relief
  • Steering Wheels
  • Separators without non disposable filter

Accessories For Outboard Steerings

Tie Rods for Outboard Steering

2202911 Tie Rod for Outboard Steering – Center distance between motors 450 – 650 mm
2202912 Tie Rod for Outboard Steering – Center distance between motors 650 – 850 mm
2202912 Tie Rod
2202041 Tie Rod for Outboard Steering – Center distance between motors 470 – 710 mm*
2202102 Tie Rod for Outboard Steering – Center distance between motors 710 – 940 mm*
2202041 Tie Rod
2202103 Tie Rod for Outboard Steering – Center distance between motors 580 – 810 mm*
To be fitted with 1 VHM EX 350 HP or 1 VHM EX 3500 HP
2202103 Tie Rod
2202123 Tie Rod for Outboard Steering – Center distance between motors 650 – 880 mm*
To be fitted with 2 VHM EX 350 HP or 2 VHM EX 3500 HP
2202123 Tie Rod
2203756 Tie Rod for Outboard Steering – Center distance between motors 600 – 820 mm*
To be fitted with 1 VHM EX 125/175/225 HP
2203756 Tie Rod
2203614 Tie Rod for Outboard Steering – Center distance between motors 640 – 850 mm*
To be fitted with 2 VHM EX 125/175/225 HP

* Allow the tilting of one motor independently of the other one

2203614 Tie Rod

Equipped Grease Nipple

1206946 Equipped Grease Nipple

This grease nipple comes with a seal and fits all L.S hydraulic steering systems for outboards up to 175 hp and all types of cable steering.

By design:

  • it facilitates the maintenance of the outboard motor screw tube
  • it enhances the grease ability to hold in the motor screw tube while cutting down external pollution (water, salt, dust…)
1206946 Equipped Grease Nipple

Equipped Grease Nipple

2203593 Speedy Purge
LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats.
LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses.
Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up.
Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas.
220383   
LS Speedy purge – 12V – with 4 m extension hoses
1206948
Set of 2 x 4 m extension hoses
2203593 LS Speedy purge

Adapter Kit for Honda Motors

2203671 Adapter Kit for Honda Motors

Lecomble & Schmitt has developed a kit for mounting its hydraulic steering cylinders for outboard motors on HONDA 115, 135 and 150 HP motors.

This kit makes it possible to integrate LS cylinders type VHM EX 125, 175 and 225 HP easily, without specific tools or modifications.

Adapter kit for Honda Motors
Adapter kit for Honda Motors - Schéma

Pump Bezel

2201058 Pump Bezel

Set of Fittings for EVIRUDE E-TEC G2

2203948 Set of Fittings for EVIRUDE E-TEC G2

For the installation of LS pumps and hydraulic hoses on the EVINRUDE ETEC G2 outboard motor range.

Set of Fittings for EVIRUDE E-TEC G2

Cut Back Bracket for LS Cylinder VHM 125/175/225 HP

1207000 Cut Back Bracket for LS Cylinder VHM 125/175/225 HP

VHM 80/125 HP Set of Bullhorns for Suzuki

2203947 VHM 80/125 HP Set of Bullhorns for Suzuki
VHM 80 - 125 HP Set of Bullhorns for Suzuki

Bulkhead Strain Relief

2201753 Bulkhead Strain Relief

Suitable for all LS flexible tubes and all other flexible tubes with an outer diameter of 8 to 12 mm

Bulkhead Strain Relief

Sets of Fittings for Flexible Tubes

2201989 Set of elbow fittings flexible tube – pump 1/8 BSPP Ø6
2202115 Set of elbow fittings flexible tube – pump 1/8 BSPP Ø8
2201989 Elbow Fittings Flexible Tube
2200807 Set of straight fittings flexible tube – pump 1/8 BSPP Ø6
2202723 Set of straight fittings flexible tube – pump 1/4 BSPP Ø8
2200807 Set of straight fittings flexible tube
2200021 Set of adjustable elbow fittings flexible tube 1/4 BSPP Ø8
2200674 Set of adjustable elbow fittings flexible tube 1/4 BSPP Ø10
2200021 Set of adjustable elbow fittings flexible tube tube quarter BSPP
2200022 Set of elbow fittings flexible tube 1/4 BSPP Ø8
2200023 Set of s/steel elbow fittings flexible tube 1/4 BSPP Ø8
2200022 Set of elbow fittings flexible tube quarter BSPP
2200123 Set of straight fittings flexible tube 1/4 BSPP Ø8
2200038 Set of s/steel straight fittings flexible tube 1/4 BSPP Ø8
2200068 Set of straight fittings flexible tube 1/4 BSPP Ø10
2200123 Set of straight fittings flexible tube quarter BSPP

Sets of Straight Fittings for Inflexible Tubes

2200048 Set of straight fittings inflexible tube 1/4 BSPP Ø10
2200089 Set of straight fittings inflexible tube 3/8 BSPP Ø12
2200107 Set of straight fittings inflexible tube 1/2 BSPP Ø18
2200048 Set of straight fittings inflexible tube
2200049 Set of fittings 1/4 BSPP Ø10 + tube lg 500 mm
2200096 Set of fittings 3/8 BSPP Ø12 + tube lg 500 mm
2200109 Set of fittings 1/2 BSPP Ø18 + tube lg 500 mm
2200049 Set of fittings quarter BSPP + tube lg 500 mm

Sets of Tees Flexible Tubes

2200047 Set of tees – flexible tube Ø8
2200072 Set of tees – flexible tube Ø10
2200047 Set of tees - flexible tube
2200809 Set of tees – flexible tube Ø6
2200809 Set of tees - flexible tube

Sets of Tees for Inflexible Tubes

2200046 Set of Tees – Inflexible Tubes Ø10
2200102 Set of Tees – Inflexible Tubes Ø12
2200115 Set of Tees – Inflexible Tubes Ø18
2200046 Set of Tees - Inflexible Tubes

Fittings for Flexible Tubes

Steel S/Steel      
2200321 2200309 Elbow Fittings 90° 1/4 BSPT conic JIC M. 9/16 Elbow Fittings 90
2200426     3/8 BSPT conic JIC M. 9/16
1205997 1206365 Swivel Elbow Fittings 1/4 BSPP cylindric JIC M. 9/16 1205997 Swivel Elbow Fittings
1205894 1205656 Swivel Elbow Fittings JIC M. 9/16 – JIC F 9/16 1205894 Swivel Elbow Fittings
2200427 2200447 Straight Fittings 1/4 BSPT conic JIC M. 9/16 2200427 Straight Fittings
2200199 2200448   1/4 BSPP cylindric JIC M. 9/16
2200428     3/8 BSPT conic JIC M. 9/16
2200429 2202039   3/8 BSPP cylindric JIC M. 9/16
2200430   Adaptaters 1/4 BSPT conic JIC F.T. 9/16 2200430 Adaptaters
2200356     3/8 BSPT conic JIC F.T. 9/16
2200288   Connection Fittings JIC M. 9/16 2200288 Connection Fittings
2200431   Tee Fittings Rotatable 1/4 BSPP cylindric 2 x JIC M. 9/16 2200431 Tee Fittings
2200432     3/8 BSPT conic 2 x JIC M. 9/16
2200433 2202009 Equal Tee Fittings JIC M. 9/16 2200433 Equal Tee Fittings
2201566   Swivel Tee Fittings Rotatable JIC M. 9/16 2201566 Swivel Tee Fittings
2200299 2200449 Straight Fittings JIC M. 9/16 inner diam. 8 2200299 Straight Fittings
2200301     JIC M. 9/16 inner diam. 10
2200302   Elbow Fittings JIC M. 9/16 inner diam. 8 2200302 Elbow Fittings
2200303     JIC M. 9/16 inner diam. 10
2200373   Connection Fittings Inner diam. 8 2200373 Connection Fittings
2200434     Inner diam. 10

Flexible Tubes for crimp connections

Only the sole use of LS flexible tubes in Ø6, Ø8 or Ø10 mm will guarantee the global performances and safe use of LS Steering Systems.

2200810 Ø6 Flexible tube per metre  Flexible tubes for crimp connections
2200024 Ø8 Flexible tube per metre
2200070 Ø10 Flexible tube per metre
   
1204267 Ø6 Flexible tube – length 8 m
1204268 Ø6 Flexible tube – length 10 m
1204740 Ø6 Flexible tube – length 12 m
1204985 Ø6 Flexible tube – length 25 m
1205301 Ø6 Flexible tube – length 35 m
1205359 Ø6 Flexible tube – length 400 m
   
1204825 Ø8 Flexible tube – length 10 m
1204742 Ø8 Flexible tube – length 12 m
1205245 Ø8 Flexible tube – length 20 m
1205300 Ø8 Flexible tube – length 35 m
1205360 Ø8 Flexible tube – length 400 m

Flexible Tubes with pre-crimped Fittings + Bulk Strain relief

1290502 Flex. tube with pre-crimped fittings – lg 5 m
1290503 Flex. tube with pre-crimped fittings – lg 6 m
1290610 Flex. tube with pre-crimped fittings – lg 6.5 m
1290504 Flex. tube with pre-crimped fittings – lg 7.5 m
1290503 Flexible tube with pre-crimped fittings

Steering Wheels

2200181 Plastic Wheel Ø 320
2200181 Plastic Wheel ∅ 320
2200181 Plastic Wheel Diagram 320
2200182 Imitation Leather/Anodised Alu Ø 320
2200182 Imitation Leather Anodised Alu diam 320
2200182 Imitation Leather Anodised Alu diam 320 diagram
2202462 S/Steel Wheel with Knob Ø 275
2202462 LS Sainless Steel Wheel with Knob 275
2202462 LS Sainless Steel Wheel with Knob 275 Diagram
2200985 S/Steel Wheel Ø 350
2200985 LS Stainless Steel Wheel 350
2200985 LS Stainless Steel Wheel 350 Diagram
2203377 Covered S/Steel Wheel Ø 360
2203377 LS Covered Stainless Steel Wheel 360
2203377 LS Covered Stainless Steel Wheel 360 Diagram
2200986 S/Steel Ø 400
2200986 LS Stainless Steel 400
2200986 LS Stainless Steel 400 Diagram

Separators without non disposable filter

For decanting and separating condensation water in tanks, these environment-friendly fuel-water separator without filter are compatible with all petrol and diesel-oil fuels containing ethanol. Specifically designed for outboard motors, these fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual. Nature-friendly, they are fully recyclable and are already widely successful. They have been patented and are distributed by Lecomble & Schmitt.

2203322 Filter DSC 1.0

Fuel-water separator specifically designed for outboard motors from 4hp to 45hp, DSC1.0 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.

2203322 Filter DSC1-0
2203103 Filter DSC 1

Fuel-water separator specifically designed for outboard motors from 45hp to 300hp, DSC1.0 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.

2203103 Filter DSC1