Select Page

External Installation (Cylinder only) with Fixed Flow

  • Single rod hydraulic cylinder with stainless steel fittings.
  • Compact overall dimensions for installation on most types of boats.
  • Directly connectable to the quadrant or the tiller arm.
  • Separate reversible power pack with integrated electrical by-pass, for installation at your selected location inside the boat.
  • The kit is supplied assembled and bled with 1.50 metre flexible tube (Other lengths on request).

Complete Kits

Linear Drives 32 ST 16BP 40T 254 BP

Linear Drives
220306532 ST 16 BP Newave 12 V
220307340 T 254 BP Newave 12 V
Elbow fittings on cylinder
220306532 ST 16 BP Newave 12 V RI
220307340 T 254 BP Newave 12 V RI
Elbow fittings on cylinder

Linear Drives 32 ST 16BP Dimensions Drawing Dimension Drawings

Power Packs
2203076Power Pack RV1 BP Newave 12 V
2203079Power Pack RV2 BP Newave 12 V

Cylinders VHM 32 ST 16 C17 VHM 40 T C254

Cylinders
2201261Cylinder VHM 32 ST 16 C172
2201960Cylinder VHM 40 T C254

 VHM 32 ST 16 C172VHM 40 T C254
A136.5200
B482609
C172254
D150220
E1517
F1620
Thrust280 kg450 kg

Internal Installation with Adjustable Flow

  • Single rod hydraulic cylinder with integrated electrical by-pass.
  • Compact overall dimensions for installation on virtually all types of boats.
  • Directly fitted on the quadrant.
  • Speed adjustment on the reversible power pack.
  • Separate reversible power pack with adjustable flow for installation at your selected location.
  • The kit is supplied assembled and bled with 20 metre flexible tube (Other lengths on request).
  • All fittings in stainless steel.

Complete Kits

Linear Drive 40 ST 16 REG DE BP

Linear Drives
220360340 ST 16 REG DE BP 12 V RI
220361640 ST 16 REG DE BP 24 V RI

Power Packs RV2 ST

Power Packs
2201100RV2 ST 12 V
2201101RV2 ST 24 V

Power Packs RV2 ST Dimensions Diagram

RV2 ST
A803 (5/32)
B702 (3/4)
C2067 (7/64)
D44
E24_ (15/16)
F28011 (1/64)

Cylinder VHM 40 ST 16 Newave

Cylinders
2203086VHM 40 ST 16 Newave 12 V
2203087VHM 40 ST 16 Newave 24 V

Cylinder VHM 40 ST 16 Newave Dimensions Drawing

40 ST 16 Newave
Max Thrust450kg992 lbs
Weight3,6 kg7.9 lbs
A1204 (23/32)
B61324 (1/8)
C15_ (19/32)
D562 (55/64)
E2409 (7/16)
F1907 (31/64)
G1726 (61/64)

Internal Installation with Fixed Flow

  • Single rod hydraulic cylinder with integrated electrical by-pass.
  • Compact overall dimensions.
  • Directly fitted on the quadrant.
  • Possible floor, ceiling or bulkhead installation of the cylinder.
  • Separate reversible power pack with fixed flow for installation at your selected location.
  • The kit is supplied assembled and bled with 1.20 metre flexible tube (Other lengths on request).
  • Features the best thrust/electrical consumption ratio on the market.

Complete Kits

Linear Drive 40 ST 16 Newave
Linear Drives
220306332 ST 16 Newave 12 V RI
220306432 ST 16 Newave 24 V RI
220306640 ST 16 Newave 12 V RI
220306740 ST 16 Newave 24 V RI
220306850 ST 20 Newave 12 V RI
220306950 ST 20 Newave 24 V RI
220307050 ST 203 Newave 12 V RI
220307150 ST 203 Newave 24 V RI
For steering wheel diameters exceeding 1200 mm and for B&G and Simrad autopilots, we recommend that linear drives with adjustable flow on the reversible power packs be used.
Power Pack RV1 RV2 RV3
Power Packs
2203074RV1 Newave 12 V
2203077RV2 Newave 12 V
2203080 RV3 Newave 12 V
2203075RV1 Newave 24 V
2203078RV2 Newave 24 V
2203081RV3 Newave 24 V
Power Pack RV1 RV2 RV3 Dimensions Drawing
 RV1, RV2, RV3 Newave
A803 (5/32)
B702 (3/4)
C2067 (7/64)
D44
E24_ (15/16)
F28011 (1/64)
VHM 40 ST 16 Newave
Cylinders
2203084VHM 32 ST 16 Newave 12 V
2203086VHM 40 ST 16 Newave 12 V
2203088VHM 50 ST 20 Newave 12 V
2203085VHM 32 ST 16 Newave 24 V
2203087VHM 40 ST 16 Newave 24 V
2203089VHM 50 ST 20 Newave 24 V
VHM 40 ST 16 Newave Dimensions Drawing

Click to enlarge (above)

 32 ST 16 Newave  40 ST 16 Newave 50 ST 20 Newave
Max Thrust280 kg617 lbs450 kg992 lbs700 kg1543 lbs
Weight3,5 kg7.71 lbs3,6 kg7.9 lbs5 kg11 lbs
A1204 (23/32)1204 (23/32)1204 (23/32)
B56322 (11/64)61324 (1/8)71528 (9/64)
C15_ (19/32)15_ (19/32)17_ (43/64)
D461 (13/16)562 (55/64)702 (3/4)
E2108 (17/64)2409 (7/16)30011 (13/16)
F17011 (1/64)1907 (31/64)2409 (29/64)
G1606 (19/64)1726 (61/64)2188 (37/64)

Complete Kits

Linear Drive 63 ST 28 DEBP Newave
Linear Drives
220380563 ST 28 DEBP Newave 12 V RI
220380263 ST 28 DEBP Newave 24 V RI
Power Pack RV3
Power Packs
2203080RV3 Newave 12 V
2203081RV3 Newave 24 V
Power Pack RV3 Dimensions Drawing
 RV3 Newave
A803 (5/32)
B702 (3/4)
C2067 (7/64)
D44
E24_ (15/16)
F28011 (1/64)
VHM 40 ST 16 Newave
Cylinders
2203806VHM 63 ST 28 DEBP Newave 12 V
2203802VHM 63 ST 28 DEBP Newave 24 V
Linear Drive 63 ST 28 DEBP Newave Dimensions Drawing
 63 ST 28 DEBP Newave
Max Thrust1110 kg2447 lbs
Weight18 kg39.65 lbs
A1807 (3/32)
B80231 (37/64)
C25_ (63/64)
D903 (35/64)
E30011 (13/16)
F2409 (29/64)
G2188 (37/64)

Hydraulic Electro-Pump Units with Fixed Flow

Hydraulic H.F. Units

Hydraulic Electro-Pump Units with Fixed Flow units are mainly designed for large pleasure boats, fishing and work crafts. Owing to a very strong construction, large oil tanks, high reliability of the pumps and distributors and to the easily accessible external mounting of elements connected with flexible tubes, these devices are the leaders on the market in the field of hydraulic electro-pump units.

Hydraulic H.F. Units
Hydraulic H.F. Units Dimensions Drawing

 Tank volumeFlowrate
Weight
ABCC
2200190 HF 1-2.510 litres2,5 l/mn750460220125
2.65 US gall35 kg29 (17/32)18 (7/64)8 (5/8)4 (59/64)
2200148 HF 1-310 litres3 l/mn750460220125
2.65 US gall35 kg29 (17/32)18 (7/64)8 (5/8)4 (59/64)
2200149 HF 1-410 litres4 l/mn750460220125
2.65 US gall35 kg29 (17/32)18 (7/64)8 (5/8)4 (59/64)
2200150 HF 1-625 litres6 l/mn750560270225
6.62 US gall45 kg29 (17/32)22 (3/64)10 (5/8)8 (7/8)
2200151 HF 1.9-910 litres9 l/mn750560270225
6.62 US gall57 kg29 (17/32)22 (3/64)10 (5/8)8 (7/8)
2200195 HF 1.9-1110 litres11 l/mn770560270225
6.62 US gall57 kg30 (5/16)22 (3/64)10 (5/8)8 (7/8)
2200955 HF 3-1550 litres15 l/mn810785270450
13.2 US gall61 kg31 (57/64)30 (29/32)10 (5/8)17 (3/8)
2200562 HF 3-1810 litres18 l/mn810785270450
13.2 US gall62 kg31 (57/64)30 (29/32)10 (5/8)17 (3/8)
60 bars maximum pressure – Note : Standard 24 VDC. Other voltages upon request

Hydraulic Power Packs with Adjustable Flow (non reversible)

Power Packs with Electrovalves

Hydraulic Power Packs with Adjustable Flow (non reversible) in 12 or 24 V for pleasure, fishing and work boats. They are fitted with an electro-distributor and an oil reservoir. Flow adjustment is done through a screw which allows accurate regulation of the time required for lock to lock displacement.

 12 VOLTS24 VOLTS
Power Pack EV2>strong/>22004092200980
Power Pack EV322008442200981
Caution : The pressure limiter has been factory adjusted (30 bars max. pressure). Please do not modify.

EV2EV3
Maximum cylinder capacity (cc)432650
Power pack flow rate (l/mn)0.2 à 20.3 à 3
Oil reservoir capacity1 L1 L
Recommended protection 12/24 V25 A / 16 A30 A / 16 A

Power Packs EV2 EV3 Dimensions Diagram

 EV2, EV3
A803 (5/32)
B983 (7/8)
C30511 1/64
D2424 (15/16)
E391 (35/64)
F42 (3/4)
G2208 11/16

Power Packs EV2 EV3

Reversible Power Packs with Adjustable Flow

Reversible Power Packs for Double Rod Cylinders

Hydraulic reversible Power Packs with adjustable flow in 12 or 24 V for pleasure, fishing and work boats. They are reversible by changing the polarity on the motor terminals. Flow adjustment is done through a screw which allows accurate regulation of the time required for lock to lock displacement. These power packs are fitted with lock valves.

12 VOLTS24 VOLTS
Power-Pack RV122008432200944
Power-Pack RV222004102200945
Power-Pack RV322004032200946

Reversible Power Packs for Single Rod Cylinders

Hydraulic reversible Power Packs with adjustable flow in 12 or 24 V for pleasure, fishing and work boats fitted with a single rod cylinder (unbalanced cylinder on outboard or stern-drive motors). They are reversible by changing the polarity on the motor terminals. Flow adjustment is done through a screw which allows accurate regulation of the time required for lock to lock displacement. These power packs are fitted with lock valves.

12 VOLTS24 VOLTS
Power-Pack RV2-Z22032402203261

Power-Packs RV1 RV2 RV2-Z RV3

RV1RV2 / RV2-ZRV3
Maximum cylinder capacity (cc)216432650
Power pack flow rate (l/mn)0.1 à 10.2 à 20.3 à 3
Recommended protection 12/24 V16 A / 6 A25 A / 16 A30 A / 16 A
30 bars maxi pressure – other pressures, contact us.

Power-Packs RV1 RV2 RV2-Z RV3 Dimensions Drawing

 RV1, RV2 / RV2-Z, RV3
A803 (5/32)
B983 (7/8)
C30011 (13/16)
D2424 (15/16)
E391 (35/64)
F702 (3/4)
G44

Selection of the System

For boats equipped with a hydraulic steering, it will be necessary to determine:
– The volume of the steering cylinder (take the biggest volume in case of a single rod cylinder)
– Available voltage on board (12 VDC, 24 VDC, etc.)

For planing or semi-planing hulls, the power pack will be selected in function of its flow rate so that the steering cylinder will run its complete stroke within 10 to 12 seconds.

For displacement hulls, the power pack flow rate must enable the steering cylinder to run its complete stroke within 15 to 17 seconds.
Examples:

  • Speed boat, planing hull with a 239 cc cylinder – Available voltage 12 VDC60 seconds (1 minute)
    —————————-
    12 seconds (required time) x 0.239 litre (239 cc) = 1.195 litre / minute
    The flow rate of the required power pack will be 1.19 litre / minute, therefore we will select a reversible power pack with adjustable flow rate type RV2 (12 V)
  • Fishing or work boat, displacement hull with a 2,307 cc cylinder – Available voltage 24 VDC60 seconds (1 minute)
    —————————-
    15 seconds (required time) x 2.307 litre (2307 cc) = 9.228 litre / minute
    The flow rate of the required power pack will be around 9 litres / minute, therefore we will select a power pack type HF 1.5 – 9 (24 V)

 

For boats equipped with a mechanical steering (wire ropes, cables, rack and pinion), it will be necessary to determine:

– The rudder(s) torque
– The available voltage on board (12 VDC, 24 VDC, etc.)

Torque Calculation:
For boats fitted with a rudder with speed not exceeding 25 knots, the torque (C) of the rudder or rudders will be calculated according to the formula and correction coefficients below:

C = S x [ (0.4 Lg) – Lc ] x V² x K

C = Torque in kpm
S = Total surface of rudder (H x Lg) in sq. m
H = Height of rudder in m
Lg = Width of rudder in m
Lc = Compensation width in m
V = Maximum speed of the boat in knots
K = Coefficient according to total angle of rudder

Port to starboard70°K = 15.89
Port to starboard80°K = 17.80
Port to starboard90°K = 19.52

Torque Diagram

Corrections in function of the type of boat:
For sailing-boatsC x 0.5
For boats fitted with several rudders (catamarans, trimarans, monohulls)multiply the calculated torque result by the number of rudders fitted on the boat
Examples:
H = 1.2 mSpeed under sail = 12 knots
Lg = 0.7 mSpeed with motor = 8 knots
Lc = 0.18S = 1.2 x 0.7 = 0.84 m2
Torque under sail = (0.84 x [(0.4 x 0.7) – 0.18] x 122 x 15.89) x 0.5 = 96.11 m.kg
Torque with motor = 0.84 x [(0.4 x 0,7) – 0.18] x 82 x 15.89 = 85.42 m.kg

Selection of the linear drive:
Torque not exceeding 50 kpmLinear drive type 32ST16 NEWAVE
Torque not exceeding 100 kpmLinear drive type 40ST16 NEWAVE
Torque not exceeding 200 kpmLinear drive type 50ST20 NEWAVE
Torque not exceeding 390 kpmLinear drive type 63ST28 DEBP NEWAVE

In the above example, the calculated torque is 96.11 kpm. Therefore the correct selection will be a linear drive type 40ST16 NEWAVE.

Note : for sailing boats with a modern hull and balanced rudder, the selection can be made in function of the boat length as below:

LengthLinear drive type
Length not exceeding 33 feet32ST16 NEWAVE*
Length not exceeding 44 feet40ST16 NEWAVE*
Length not exceeding 60 feet50ST20 NEWAVE*
Length not exceeding 80 feet63ST28 DEBP NEWAVE*

*Data given as an indication only

Power Packs and Linear Drives for Autopilots

LS power packs and linear drives for autopilots are perfectly adapted to the requirements of various applications, such as pleasure boating, coastal or deep sea navigation, workboats, professional or recreational fishing, sailing and power boat competition.

They are easy to install, state of the art machine finished and made to withstand the demanding marine environment.

You can easily select the best suited system for your boat within a wide range of equipment.

Our systems carry a 2 year warranty and are fully compatible with all major brands of autopilot electronics available on the market today.

2200843 Linear Drive
2203065 Linear Drive Assembly

Accessories for Work Boats

Fill and Bleed Power Pack “LS SPEEDY PURGE”

2203593 Speedy Purge
LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats.
LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses.
Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up.
Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas.
2203836   
LS Speedy purge – 12V – with 4 m extension hoses
1206948
Set of 2 x 4 m extension hoses
2203593 LS Speedy purge

Electrical By-pass

2200376 Electrical By-pass NO 06 12 VDC 3/8 BSPP
2201479 Electrical By-pass NO 06 24 VDC 3/8 BSPP
2200566 Electrical By-pass NO 12 12 VDC 1/2 BSPP
2201438 Electrical By-pass NO 12 24 VDC 1/2 BSPP
2200376 Electrical By-Pass

Lock Valves on line

2200078-Lock Valve On Line
2200078 Lock Valve On Line Dimensions Drawing
2200078 Lock Valve on line LS 115

for pumps: 30 HB-without LV, 35 HB-without LV, 40 HB-without LV, 50 HB-without LV, 70 CT-without LV, 90 CT-without LV

2200110 Lock Valve On Line LS170
2200110 Lock Valve On Line LS170 Dimensions Drawing
2200110 Lock Valve on line LS 170

for pumps: 105 CT-without LV, 150 without LV, 170 without LV, 200 CT-without LV

Adaptable Cones

2201138 Adaptable Cone + pin Ø 22 – 2°30 angle
  for pumps: 30 HB, 35 HB, 40 HB
Adaptable Cone + pin Ø 22 - 2°30 angle
2200029 Adaptable Cone + pin Ø 24.5 – 8° angle
  for pumps: 30 HB, 35 HB, 40 HB
2200029-Adaptable Cone + pin Ø 24.5 - 8° angle

Dual Pressure Relief Valve

Dual Pressure Relief Valve
Dual Pressure Relief Valve Dimensions Drawing
2203369 Dual Pressure Relief Valve

By-pass Valves

2200683 By-pass valve–inflexible tube 6 x 8
2200045 By-pass valve–inflexible tube 8 x 10
2200097 By-pass valve–inflexible tube 10 x 12
2202022 By-pass valve–inflexible tube 13 x 15
2200015 By-pass valve–inflexible tube 15 x 18
2200683 By-Pass Valve Inflexible Tube

Bulkhead Strain Relief

2201753 Bulkhead Strain Relief
  Suitable for all LS flexible tubes and all other flexible tubes with an outer diameter of 8 to 12 mm.  
Bulkhead Strain Relief

Pump 200 CT without Lock Valve

2200106 Pump 200 CT

2200135 Pump 200 CT without Lock Valve
Flow rate200 cc/t12.2 cu.in
Minimum size of tubing15×18 mm.59x.70″
Weight17 kg37.5 lbs
Volume2000 cc122 cu.in
Maximum Wheel diameter∅1000 mm39 3/8″
Dimensions Drawing

Accessories for Pump 200 CT without Lock Valve
2200107Set of straight fittings for pump 1/2 BSPP Ø 18 mm
2200110Lock valve LS 170
2200111Set of straight fittings for lock valve 1/2 BSPP Ø 18 mm
2200115Set of tees for Ø 18 mm inflexible tube
2200179Wooden wheel Ø 1000 mm
∅ 15-21 fittings available on request

Pump 150 CT without Lock Valve

2200106 Pump 150 CT

2200130 Pump 150 CT without Lock Valve
Flow rate150 cc/t 9.15 cu.in
Minimum size of tubing15×18 mm.59x.70″
Weight16.4 kg36.2 lbs
Volume2000 cc122 cu.in
Maximum Wheel diameter∅1000 mm39 3/8″
Dimensions Drawing

Accessories for Pump 150 CT without Lock Valve
2200107Set of straight fittings for pump 1/2 BSPP Ø 18 mm
2200110Lock valve LS 170
2200111Set of straight fittings for lock valve 1/2 BSPP Ø 18 mm
2200115Set of tees for Ø 18 mm inflexible tube
2200178Wooden wheel Ø 800 mm
∅ 15-21 fittings available on request

Pump 105 CT without Lock Valve

2200106 Pump 105 CT

2200106 Pump 105 CT without Lock Valve
Flow rate105 cc/t6.41 cu.in
Minimum size of tubing15×18 mm.59x.70″
Weight16.4 kg36.2 lbs
Volume2000 cc122 cu.in
Maximum Wheel diameter∅1000 mm39 3/8″
Dimensions Drawing

Accessories for Pump 105 CT without Lock Valve
2200107Set of straight fittings for pump 1/2 BSPP Ø 18 mm
2200110Lock valve LS 170
2200111Set of straight fittings for lock valve 1/2 BSPP Ø 18 mm
2200115Set of tees for Ø 18 mm inflexible tube
2200177Wooden wheel Ø 700 mm
∅ 15-21 fittings available on request

Pump 90 CT without Lock Valve – 90 CT with Lock Valve

2200194 Pump 90 CT

2200494 Pump 90 CT without Lock Valve
2200489 Pump 90 CT with Lock Valve
Flow rate90 cc/t5.5 cu.in
Minimum size of tubing10×12 mm.39x.47″
Weight5.5 kg12.1 lbs
Volume660 cc40 cu.in
Maximum Wheel diameter∅1 000 mm39 3/8″
Dimensions Drawing

Accessories for Pump 90 CT without Lock Valve – 90 CT with Lock Valve
2200089Set of straight fittings 3/8 BSPP Ø 12 mm
2200102Set of tees for Ø 12 mm inflexible tube
2200998Wooden wheel Ø 700 mm
∅ 12-17 fittings available on request

Pump 70 CT without Lock Valve – 70 CT with Lock Valve

2200194 Pump 70 CT

2200194 Pump 70 CT without Lock Valve
2200088 Pump 70 CT with Lock Valve
Flow rate70 cc/t4.27 cu.in
Minimum size of tubing10×12 mm.39x.47″
Weight5.5 kg12.1 lbs
Volume660 cc40 cu.in
Maximum Wheel diametre∅1 000 mm39 3/8″
Dimension Drawing

Accessories for Pump 70 CT without Lock Valve – 70 CT with Lock Valve
2200089Set of straight fittings 3/8 BSPP Ø 12 mm
2200102Set of tees for Ø 12 mm inflexible tube
2200175Wooden wheel Ø 600 mm
∅ 12-17 fittings available on request

Hydraulic Cylinder VHM 120 DT APD

2202685 VHM 120 DT APD 
Maximum torque2000 kpm14770 ft.lbs
Stroke400 mm15 3/4″
Maximum pressure60 bars870 PSI
Volume3798 cc231.8 cu.in
Radius of tiller arm350 mm13 3/4″
Total rudder angle70°
Weight51 kg112.5 lbs
Dimension Drawing for 2202685

Cylinder VHM 120 DT

Accessories for VHM 120 DT APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2200134Tiller arm LS 1350 – 1660 + screws & bolts

Hydraulic Cylinder VHM 110 DT APD

2202698 VHM 110 DT APD 
Maximum torque1600 kpm11800 ft.lbs
Stroke400 mm15 3/4″
Maximum pressure60 bars870 PSI
Volume3076 cc187.7 cu.in
Radius of tiller arm350 mm13 3/4″
Total rudder angle70°
Weight48 kg105.8 lbs
Dimension Drawing for 2202698

Cylinder VHM 110 DT

Accessories for VHM 110 DT APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2200134Tiller arm LS 1350 – 1660 + screws & bolts

Hydraulic Cylinder VHM 110 DT C300 APD

2202815 VHM 110 DT C300 APD 
Maximum torque1200 kpm8660 ft.lbs
Stroke300 mm11 13/16″
Maximum pressure60 bars870 PSI
Volume2307 cc141 cu.in
Radius of tiller arm260 mm 10 1/4″
Total rudder angle70°
Weight43.5 kg95.9 lbs
Dimension Drawing for 2202815

Cylinder VHM 110 DT C300

Accessories for VHM 110 DT C300 APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2201935Tiller arm LS 1200 + screws & bolts

Hydraulic Cylinder VHM 90 DT C400 APD

2202840 VHM 90 DT C400 APD 
Maximum torque1000 kpm7233 ft.lbs
Stroke400 mm15 3/4″
Maximum pressure60 bars870 PSI
Volume2090 cc128 cu.in
Radius of tiller arm350 mm13 3/4″
Total rudder angle70°
Weight40 kg88.2 lbs
Dimension Drawing for 2202840

Cylinder VHM 90 DT C400

Accessories for VHM 90 DT C400 APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2202626Tiller arm LS 1000 + screws & bolts

Hydraulic Cylinder VHM 90 DT APD

2202699 VHM 90 DT APD 
Maximum torque840 kpm6076 ft.lbs
Stroke300 mm11 13/16″
Maximum pressure60 bars870 PSI
Volume1567 cc95.6 cu.in
Radius of tiller arm260 mm10 1/4″
Total rudder angle70°
Weight32.5 kg71.7 lbs
Dimension Drawing for 2202699

Cylinder VHM 90 DT

Accessories for VHM 90 DT APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2200113Tiller arm LS 550 – 840 + screws & bolts

Hydraulic Cylinder VHM 80 DT APD

2202700 VHM 80 DT APD 
Maximum torque600 kpm4430 ft.lbs
Stroke300 mm11 13/16″
Maximum pressure60 bars870 PSI
Volume1167 cc71.2 cu.in
Radius of tiller arm260 mm10 1/4″
Total rudder angle70°
Weight30 kg66 lbs
Dimension Drawing for 2202700

Cylinder VHM 80 DT

Accessories for VHM 80 DT APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2200113Tiller arm LS 550 – 840 + screws & bolts

Hydraulic Cylinder VHM 63 DT C345 APD

2202932 VHM 63 DT C345 APD 
Maximum torque450 kpm3250 ft.lbs
Stroke345 mm13 19/32″
Maximum pressure60 bars870 PSI
Volume862 cc52.6 cu.in
Radius of tiller arm300 mm11 13/16″
Total rudder angle70°
Weight15.7 kg34.6 lbs
Dimension Drawing for 2202932

Cylinder VHM 63 DT C345

Accessories for VHM 60 DT APD
2200109Set of flexible tube and fittings 1/2 BSPP Ø 18 mm
2200015By-pass for Ø 18 mm inflexible tube
2201540Tiller arm LS 450 + screws & bolts

Hydraulic Cylinder VHM 60 DT APD

2200094 VHM 60 DT APD 
Maximum torque265 kpm1957 ft.lbs
Stroke228 mm9″
Maximum pressure60 bars870 PSI
Volume505 cc30.8 cu.in
Radius of tiller arm200 mm7 7/8″
Total rudder angle70°
Weight14.2 kg31.3 lbs
Dimension Drawing for 2200094

Cylinder VHM 60 DT

Accessories for VHM 60 DT APD
2200096Set of flexible tube and fittings 3/8 BSPP Ø 12 mm
2200097By-pass for Ø 12 mm inflexible tube
2200099Tiller arm LS 155 + screws & bolts

Hydraulic Cylinder VHM 60 DT C300 APD

2200095 VHM 60 DT C300 APD 
Maximum torque344 kpm2540 ft.lbs
Stroke300 mm11 13/16″
Maximum pressure60 bars870 PSI
Volume664 cc40.5 cu.in
Radius of tiller arm260 mm10 1/4″
Total rudder angle70°
Weight15.5 kg34.2 lbs
Dimension Drawing for 2200095

Cylinder VHM 60 DT C300

Accessories for VHM 60 DT C300 APD
2200096Set of flexible tube and fittings 3/8 BSPP Ø 12 mm
2200097By-pass for Ø 12 mm inflexible tube
2200100Tiller arm LS 330 + screws & bolts

Hydraulic Cylinder VHM 45 DT C228 APD

2200093 VHM 45 DT C228 APD 
Maximum torque140 kpm1033 ft.lbs
Stroke228 mm9″
Maximum pressure60 bars870 PSI
Volume268 cc18.3 cu.in
Radius of tiller arm200 mm7 7/8″
Total rudder angle70°
Weight10.9 kg24 lbs
Dimension Drawing for 2200093

Cylinder VHM 45 DT C228

Accessories for VHM 45 DT C228 APD
2200096Set of flexible tube and fittings 3/8 BSPP Ø 12 mm
2200097By-pass for Ø 12 mm inflexible tube
2200098Tiller arm LS 105 + screws & bolts

Hydraulic Flexible Tubes

Flexible Tubes for crimp connections

Only the sole use of LS flexible tubes in Ø6, Ø8 or Ø10 mm will guarantee the global performances and safe use of LS steering systems.

Hydraulic Flexible Tubes

 Ø6Ø8Ø10
Per Meter220081022000242200070
8 Meters12042671204986
10 Meters12042681204825
12 Meters12047401204742
13 Meters1204743
15 Meters1202887
16 Meters1204741
20 Meters1205245
25 Meters1204985
35 Meters12053011205300
50 Meters12072231207145
100 Meters120722912072301207231
400 Meters12053591205360
400 Meters (on reel)12070241207025

Flexible Tubes with Pre-crimped Connections

High pressure flexible tubes of various lengths with pre-crimped connections of various kinds (several diameters, straight fittings, 90° elbow fittings). Stainless steel fittings available.

A few references in 10 L:
1290013Flexible tube R1T8 lg 500 Ø 2 x EFT10L
1290023Flexible tube R1T8 lg 1000 Ø 2 x EFT10L
1290025Flexible tube R1T8 lg 1500 Ø 2 x EFT10L
1290027Flexible tube R1T8 lg 2000 Ø 2 x EFT10L
1290117Flexible tube R1T8 lg 3000 Ø 2 x EFT10L

Flexible tube R1T8

A few references in 12 L:
1290042Flexible tube R1T12 lg 500 Ø 2 x EFT12L
1290052Flexible tube R1T12 lg 1000 Ø 2 x EFT12L
1290054Flexible tube R1T12 lg 1500 Ø 2 x EFT12L
1290056Flexible tube R1T12 lg 2000 Ø 2 x EFT12L
1290130Flexible tube R1T12 lg 3000 Ø 2 x EFT12L

Flexible Tube R1T10

A few references in 15 L:
1290385Flexible tube R1T13 lg 500 Ø 2 x EFT15L
1290376Flexible tube R1T13 lg 1000 Ø 2 x EFT15L
1290387Flexible tube R1T13 lg 2000 Ø 2 x EFT15L
1290378056Flexible tube R1T13 lg 2500 Ø 2 x EFT15L

Flexible Tube

A few references in 12 L:
1290077Flexible tube R1T16 lg 500 Ø 2 x EFT18L
1290087Flexible tube R1T16 lg 1000 Ø 2 x EFT18L
1290089Flexible tube R1T16 lg 1500 Ø 2 x EFT18L
1290091Flexible tube R1T16 lg 2000 Ø 2 x EFT18L
1290112Flexible tube R1T16 lg 3000 Ø 2 x EFT18L