Accessories For Outboard Steerings

Tie Rods for Outboard Steering

2202911	Tie Rod for Outboard Steering – Center distance between motors 450 – 650 mm
2202912	Tie Rod for Outboard Steering – Center distance between motors 650 – 850 mm

2202041	Tie Rod for Outboard Steering – Center distance between motors 470 – 710 mm*
2202102	Tie Rod for Outboard Steering – Center distance between motors 710 – 940 mm*

2202103

Tie Rod for Outboard Steering – Center distance between motors 580 – 810 mm*
To be fitted with 1 VHM EX 350 HP or 1 VHM EX 3500 HP

2202123

Tie Rod for Outboard Steering – Center distance between motors 650 – 880 mm*
To be fitted with 2 VHM EX 350 HP or 2 VHM EX 3500 HP

2203756

Tie Rod for Outboard Steering – Center distance between motors 600 – 820 mm*
To be fitted with 1 VHM EX 125/175/225 HP

2203614

Tie Rod for Outboard Steering – Center distance between motors 640 – 850 mm*
To be fitted with 2 VHM EX 125/175/225 HP

* Allow the tilting of one motor independently of the other one

Equipped Grease Nipple

1206946

Equipped Grease Nipple

This grease nipple comes with a seal and fits all L.S hydraulic steering systems for outboards up to 175 hp and all types of cable steering.

By design:

it facilitates the maintenance of the outboard motor screw tube
it enhances the grease ability to hold in the motor screw tube while cutting down external pollution (water, salt, dust…)

Equipped Grease Nipple

2203593

Speedy Purge

LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats.
LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses.
Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up.
Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas.

220383

LS Speedy purge – 12V – with 4 m extension hoses

1206948

Set of 2 x 4 m extension hoses

Adapter Kit for Honda Motors

2203671

Adapter Kit for Honda Motors

Lecomble & Schmitt has developed a kit for mounting its hydraulic steering cylinders for outboard motors on HONDA 115, 135 and 150 HP motors.

This kit makes it possible to integrate LS cylinders type VHM EX 125, 175 and 225 HP easily, without specific tools or modifications.

Pump Bezel

2201058

Pump Bezel

Set of Fittings for EVIRUDE E-TEC G2

2203948

Set of Fittings for EVIRUDE E-TEC G2

For the installation of LS pumps and hydraulic hoses on the EVINRUDE ETEC G2 outboard motor range.

Cut Back Bracket for LS Cylinder VHM 125/175/225 HP

1207000

Cut Back Bracket for LS Cylinder VHM 125/175/225 HP

VHM 80/125 HP Set of Bullhorns for Suzuki

2203947

VHM 80/125 HP Set of Bullhorns for Suzuki

Bulkhead Strain Relief

2201753

Bulkhead Strain Relief

Suitable for all LS flexible tubes and all other flexible tubes with an outer diameter of 8 to 12 mm

Sets of Fittings for Flexible Tubes

2201989

Set of elbow fittings flexible tube – pump 1/8 BSPP Ø6

2202115

Set of elbow fittings flexible tube – pump 1/8 BSPP Ø8

2200807

Set of straight fittings flexible tube – pump 1/8 BSPP Ø6

2202723

Set of straight fittings flexible tube – pump 1/4 BSPP Ø8

2200807 Set of straight fittings flexible tube

2200021

Set of adjustable elbow fittings flexible tube 1/4 BSPP Ø8

2200674

Set of adjustable elbow fittings flexible tube 1/4 BSPP Ø10

2200021 Set of adjustable elbow fittings flexible tube tube quarter BSPP

2200022

Set of elbow fittings flexible tube 1/4 BSPP Ø8

2200023

Set of s/steel elbow fittings flexible tube 1/4 BSPP Ø8

2200022 Set of elbow fittings flexible tube quarter BSPP

2200123

Set of straight fittings flexible tube 1/4 BSPP Ø8

2200038

Set of s/steel straight fittings flexible tube 1/4 BSPP Ø8

2200068

Set of straight fittings flexible tube 1/4 BSPP Ø10

2200123 Set of straight fittings flexible tube quarter BSPP

Sets of Straight Fittings for Inflexible Tubes

2200048

Set of straight fittings inflexible tube 1/4 BSPP Ø10

2200089

Set of straight fittings inflexible tube 3/8 BSPP Ø12

2200107

Set of straight fittings inflexible tube 1/2 BSPP Ø18

2200048 Set of straight fittings inflexible tube

2200049

Set of fittings 1/4 BSPP Ø10 + tube lg 500 mm

2200096

Set of fittings 3/8 BSPP Ø12 + tube lg 500 mm

2200109

Set of fittings 1/2 BSPP Ø18 + tube lg 500 mm

2200049 Set of fittings quarter BSPP + tube lg 500 mm

Sets of Tees Flexible Tubes

2200047

Set of tees – flexible tube Ø8

2200072

Set of tees – flexible tube Ø10

2200809

Set of tees – flexible tube Ø6

Sets of Tees for Inflexible Tubes

2200046

Set of Tees – Inflexible Tubes Ø10

2200102

Set of Tees – Inflexible Tubes Ø12

2200115

Set of Tees – Inflexible Tubes Ø18

Fittings for Flexible Tubes

Steel	S/Steel
2200321	2200309	Elbow Fittings 90°	1/4 BSPT conic JIC M. 9/16
2200426			3/8 BSPT conic JIC M. 9/16
1205997	1206365	Swivel Elbow Fittings	1/4 BSPP cylindric JIC M. 9/16
1205894	1205656	Swivel Elbow Fittings	JIC M. 9/16 – JIC F 9/16
2200427	2200447	Straight Fittings	1/4 BSPT conic JIC M. 9/16
2200199	2200448		1/4 BSPP cylindric JIC M. 9/16
2200428			3/8 BSPT conic JIC M. 9/16
2200429	2202039		3/8 BSPP cylindric JIC M. 9/16
2200430		Adaptaters	1/4 BSPT conic JIC F.T. 9/16
2200356			3/8 BSPT conic JIC F.T. 9/16
2200288		Connection Fittings	JIC M. 9/16
2200431		Tee Fittings	Rotatable 1/4 BSPP cylindric 2 x JIC M. 9/16
2200432			3/8 BSPT conic 2 x JIC M. 9/16
2200433	2202009	Equal Tee Fittings	JIC M. 9/16
2201566		Swivel Tee Fittings	Rotatable JIC M. 9/16
2200299	2200449	Straight Fittings	JIC M. 9/16 inner diam. 8
2200301			JIC M. 9/16 inner diam. 10
2200302		Elbow Fittings	JIC M. 9/16 inner diam. 8
2200303			JIC M. 9/16 inner diam. 10
2200373		Connection Fittings	Inner diam. 8
2200434			Inner diam. 10

Flexible Tubes for crimp connections

Only the sole use of LS flexible tubes in Ø6, Ø8 or Ø10 mm will guarantee the global performances and safe use of LS Steering Systems.

2200810	Ø6 Flexible tube per metre
2200024	Ø8 Flexible tube per metre
2200070	Ø10 Flexible tube per metre

1204267	Ø6 Flexible tube – length 8 m
1204268	Ø6 Flexible tube – length 10 m
1204740	Ø6 Flexible tube – length 12 m
1204985	Ø6 Flexible tube – length 25 m
1205301	Ø6 Flexible tube – length 35 m
1205359	Ø6 Flexible tube – length 400 m

1204825	Ø8 Flexible tube – length 10 m
1204742	Ø8 Flexible tube – length 12 m
1205245	Ø8 Flexible tube – length 20 m
1205300	Ø8 Flexible tube – length 35 m
1205360	Ø8 Flexible tube – length 400 m

Flexible Tubes with pre-crimped Fittings + Bulk Strain relief

1290502

Flex. tube with pre-crimped fittings – lg 5 m

1290503

Flex. tube with pre-crimped fittings – lg 6 m

1290610

Flex. tube with pre-crimped fittings – lg 6.5 m

1290504

Flex. tube with pre-crimped fittings – lg 7.5 m

1290503 Flexible tube with pre-crimped fittings

Steering Wheels

2200181

Plastic Wheel Ø 320

2200182

Imitation Leather/Anodised Alu Ø 320

2200182 Imitation Leather Anodised Alu diam 320 diagram

2202462

S/Steel Wheel with Knob Ø 275

2202462 LS Sainless Steel Wheel with Knob 275 Diagram

2200985

S/Steel Wheel Ø 350

2200985 LS Stainless Steel Wheel 350 Diagram

2203377

Covered S/Steel Wheel Ø 360

2203377 LS Covered Stainless Steel Wheel 360 Diagram

2200986

S/Steel Ø 400

Separators without non disposable filter

For decanting and separating condensation water in tanks, these environment-friendly fuel-water separator without filter are compatible with all petrol and diesel-oil fuels containing ethanol. Specifically designed for outboard motors, these fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual. Nature-friendly, they are fully recyclable and are already widely successful. They have been patented and are distributed by Lecomble & Schmitt.

2203322

Filter DSC 1.0

Fuel-water separator specifically designed for outboard motors from 4hp to 45hp, DSC1.0 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.

2203103

Filter DSC 1

Fuel-water separator specifically designed for outboard motors from 45hp to 300hp, DSC1.0 fuel-water separator comes with two Ø8mm and two Ø10mm adjustable fittings, assembly screws and bolts and an instruction manual.