Select Page
2203593 Speedy Purge
LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats.
LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses.
Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up.
Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas.
2203836   
LS Speedy purge – 12V – with 4 m extension hoses
1206948
Set of 2 x 4 m extension hoses
2203593 LS Speedy purge

Electrical By-pass

2200376 Electrical By-pass NO 06 12 VDC 3/8 BSPP
2201479 Electrical By-pass NO 06 24 VDC 3/8 BSPP
2200566 Electrical By-pass NO 12 12 VDC 1/2 BSPP
2201438 Electrical By-pass NO 12 24 VDC 1/2 BSPP
2200376 Electrical By-Pass

Lock Valves on line

2200078-Lock Valve On Line
2200078 Lock Valve On Line Dimensions Drawing
2200078 Lock Valve on line LS 115

for pumps: 30 HB-without LV, 35 HB-without LV, 40 HB-without LV, 50 HB-without LV, 70 CT-without LV, 90 CT-without LV

2200110 Lock Valve On Line LS170
2200110 Lock Valve On Line LS170 Dimensions Drawing
2200110 Lock Valve on line LS 170

for pumps: 105 CT-without LV, 150 without LV, 170 without LV, 200 CT-without LV

Adaptable Cones

2201138 Adaptable Cone + pin Ø 22 – 2°30 angle
  for pumps: 30 HB, 35 HB, 40 HB
Adaptable Cone + pin Ø 22 - 2°30 angle
2200029 Adaptable Cone + pin Ø 24.5 – 8° angle
  for pumps: 30 HB, 35 HB, 40 HB
2200029-Adaptable Cone + pin Ø 24.5 - 8° angle

Dual Pressure Relief Valve

Dual Pressure Relief Valve
Dual Pressure Relief Valve Dimensions Drawing
2203369 Dual Pressure Relief Valve

By-pass Valves – Flexible Tubes

2200803 By-pass valve–flexible tube TS 6
2202496 By-pass valve–flexible tube TS 8
2200803 By-Pass Valve Flexible Tube
2200027 By-pass valve–flexible tube Ø 8 mm
2200067 By-pass valve–flexible tube Ø 10 mm
2200027 By Pass Valve Flexible Tube
2200683 By-pass valve–inflexible tube 6 x 8
2200045 By-pass valve–inflexible tube 8 x 10
2200097 By-pass valve–inflexible tube 10 x 12
2202022 By-pass valve–inflexible tube 13 x 15
2200015 By-pass valve–inflexible tube 15 x 18
2200683 By-Pass Valve Inflexible Tube