Time to replace your Volvo 2003 engine
Ask the internet the question replace my Volvo 2003 engine and there are several options, one is why not rebuild it with a kit for the base engine the Perkins 400 series,
But would you really want to spend a considerable amount of money on an engine that could be anything from 20 to 40 years of age and direct cooled, so seawater has been pumped through it all its life?
Another option is a new Volvo! Or the Nanni N3.30 with either a TMC 60 or TMC 60A gearbox, The N3.30 is a 29hp and has the same 410mm bed width as the Volvo 2003
Which is a major advantage when it comes to the installation. It is a heat exchanger cooled engine so you will have the option of fitting a calorifier, you can now have hot water from the engine as well as the added protection of an indirect cooled engine.
Volvo 2003 Dimensions
Before – Volvo 23hp – Click On The Image To Enlarge
The overall size of the 2 engines is virtually the same so again, another big advantage.
The engine comes standard with a 120 amp alternator, A4 panel and 4M loom.
If desired you can upgrade the instrument panel to the C4 with a temperature and oil gauge. As you will see from the picture below all service points are to the front of the engine along with the oil sump pump.
After – Nanni N3.30 – Click On The Image To Enlarge
Diagram
Nanni N3.30 with the panel options A4 and C4
Please don’t hesitate to contact us and speak to one of our technical guys about your requirements. We also stock all the parts you may require to complete the installation
e.g. exhaust hose and water locks/silencers, water hose and filters, fuel filters and hose,
batteries and cable.
N3.30 – Click On The Image To Enlarge
To see the full specification of our N3.30 Engine in the current engine range, use the link below:
N3.30
