Select Page

Hydraulic Steering Systems for Power Assisted Stern-Drives

Pump-20-26-30-35-40-50-HB
2200358 Tie Rods

Cylinder type 28 ST HB AS is fitted directly on the power assisted steering system of the stern-drive motor. No additional mounting kit is required. It is suitable for Volvo, OMC, Mercruiser, Yamaha and others

Kit Combination For Single Steering Station
22009501 Pump 30HB with lock valve
Dimension Drawing for 2200950
22003581 Cylinder VHM 28 ST HB AS
Dimension Drawing for 2200358
22000211 Set of pump fittings
22000221 Set of cylinder fittings
2200024x Metres of flexible tube Ø 8

Kit Combination For Twin Steering Station
22009502 Pumps 30HB with lock valve
Dimension Drawing for 2200950
22003581 Cylinder VHM 28 ST HB AS
Dimension Drawing for 2200358
22000213 Sets of pump fittings
22000221 Set of cylinder fittings
22000471 Set of tees
2200024x Metres of flexible tube Ø 8

Cylinders for Stern-Drives without Power Assistance

Pump-20-26-30-35-40-50-HB
2200460 Tie Rod
2200344 Tie Rod

These cylinders are fitted on in the same way as a cable steering system. Fittings and tubes are the same as for cylinder VHM 28 ST HB AS above (2200358).

Cylinder Pump & Motor Selection:Number of turns lock to lock in function of the Pump / Cylinder selectionType motor / cylinder
2200948
pump
26 HB LV
2200950
pump
30 HB LV
2201105
pump
35 HB LV
2201107
pump
40 HB LV
(Other types on request)
2200546
cylinder VHM 28 ST HB DT
Dimension Drawing for 2200546
43.632.6Up to 175 HP
Motor VOLVO
2200460
cylinder VHM 32 ST HBV DT
Dimension Drawing for 2200460
54.53.73.2Up to 260 HP
Motor VOLVO
2200344
cylinder VHM 32 ST HBM DT
Dimension Drawing for 2200344
4.74.23.53Up to 175 HP
Motor MERCRUISER – OMC

Pumps for Stern Drive: 
2200948Pump 26 HB with lock valve
2200950Pump 30 HB with lock valve
2201105Pump 35 HB with lock valve
2201107Pump 40 HB with lock valve
Dimension Drawing 'All Above'