The electrical harness consists of all electrical wires connecting the transmitters and receivers to the programmable logic controller. Its definition depends on the number and type of steering system components and on the distances between these components and the programmable logic controller.
Each wire is fitted on both ends with paired pre-swaged connector halves.
Example Electrical Harness Setup
Specifications of the steering system:
Twin steering station + 1 joystick + 3 selector knobs + 1 screen display + 1 programmable logic controller + 2 cylinders/linear sensors + 1 power pack + 1 equipped tank + 1 double proportional distributor (double cylinder).
Define the individual wire lengths on the above diagram:
VE1/AP ; BS1/AP ; V2/AP ; BS2/AP
JP1/AP ; BS3/AP
EC/AP
DP1/AP ; DP2/AP
AN/AP ; AF/AP
CL1/AP ; CL2/AP