Transmitters

With this sturdy designed electric wheel, it takes 2.5 turns for the cylinder(s) to travel their full strokes. The electric wheel is affixed with three screws behind a bulkhead and is connected to the electric harness with an identified, pre-swaged connecting pin.
It is equipped with a standard conic shaft end. To be used only on single steering station installations with a steering wheel.

With this sturdy designed electric wheel, it takes 540° (1.5 turn) for the cylinder(s) to travel their full strokes. The electric wheel is affixed with three screws behind a bulkhead and is connected to the electric harness with an identified, pre-swaged connecting pin. It is equipped with a standard conic shaft end. Thanks to the automatic recentering function, it can be used for twin steering station installations with two steering wheels.

This angular control makes it possible to maintain a selected angle to port or starboard by increments of 10 degrees, without having to operate the lever continuously. Easy to install, of sturdy design, its operation is intuitive.

Designed to monitor work functions on mobile machinery, this joystick is particularly robust. Featuring centre spring return and digital outputs (CAN), up to four units can be installed at different locations on the boat. Its protection rating corresponds to IP66/67. It also features non-contact detection (Hall Effect) and user-friendly lever ergonomics. Its proportional speed control makes it possible to increase or decrease the cylinder travel speed in function of the lever displacement speed.

When the installation includes several transmitters (steering wheel(s), joystick(s)…), the selector knob is pressed to select the transmitter to be used. It then produces a green light and disables all other transmitters.