| 2200095 VHM 60 DT C300 APD | ||
|---|---|---|
| Maximum torque | 344 kpm | 2540 ft.lbs |
| Stroke | 300 mm | 11 13/16″ |
| Maximum pressure | 60 bars | 870 PSI |
| Volume | 664 cc | 40.5 cu.in |
| Radius of tiller arm | 260 mm | 10 1/4″ |
| Total rudder angle | 70° | |
| Weight | 15.5 kg | 34.2 lbs |
| Dimension Drawing for 2200095 | ||
| Accessories for VHM 60 DT C300 APD | |
|---|---|
| 2200096 | Set of flexible tube and fittings 3/8 BSPP Ø 12 mm |
| 2200097 | By-pass for Ø 12 mm inflexible tube |
| 2200100 | Tiller arm LS 330 + screws & bolts |
| 2200093 VHM 45 DT C228 APD | ||
|---|---|---|
| Maximum torque | 140 kpm | 1033 ft.lbs |
| Stroke | 228 mm | 9″ |
| Maximum pressure | 60 bars | 870 PSI |
| Volume | 268 cc | 18.3 cu.in |
| Radius of tiller arm | 200 mm | 7 7/8″ |
| Total rudder angle | 70° | |
| Weight | 10.9 kg | 24 lbs |
| Dimension Drawing for 2200093 | ||
| Accessories for VHM 45 DT C228 APD | |
|---|---|
| 2200096 | Set of flexible tube and fittings 3/8 BSPP Ø 12 mm |
| 2200097 | By-pass for Ø 12 mm inflexible tube |
| 2200098 | Tiller arm LS 105 + screws & bolts |
In the table below you can select the PUMP / CYLINDER combination in function of the number of steering wheel turns lock to lock.
Only the sole use of LS flexible tubes in Ø6, Ø8 or Ø10 mm will guarantee the global performances and safe use of LS steering systems.
| Ø6 | Ø8 | Ø10 | |
|---|---|---|---|
| Per Meter | 2200810 | 2200024 | 2200070 |
| 8 Meters | 1204267 | 1204986 | |
| 10 Meters | 1204268 | 1204825 | |
| 12 Meters | 1204740 | 1204742 | |
| 13 Meters | 1204743 | ||
| 15 Meters | 1202887 | ||
| 16 Meters | 1204741 | ||
| 20 Meters | 1205245 | ||
| 25 Meters | 1204985 | ||
| 35 Meters | 1205301 | 1205300 | |
| 50 Meters | 1207223 | 1207145 | |
| 100 Meters | 1207229 | 1207230 | 1207231 |
| 400 Meters | 1205359 | 1205360 | |
| 400 Meters (on reel) | 1207024 | 1207025 |
High pressure flexible tubes of various lengths with pre-crimped connections of various kinds (several diameters, straight fittings, 90° elbow fittings). Stainless steel fittings available.
| A few references in 10 L: |
|
|---|---|
| 1290013 | Flexible tube R1T8 lg 500 Ø 2 x EFT10L |
| 1290023 | Flexible tube R1T8 lg 1000 Ø 2 x EFT10L |
| 1290025 | Flexible tube R1T8 lg 1500 Ø 2 x EFT10L |
| 1290027 | Flexible tube R1T8 lg 2000 Ø 2 x EFT10L |
| 1290117 | Flexible tube R1T8 lg 3000 Ø 2 x EFT10L |
| A few references in 12 L: |
|
|---|---|
| 1290042 | Flexible tube R1T12 lg 500 Ø 2 x EFT12L |
| 1290052 | Flexible tube R1T12 lg 1000 Ø 2 x EFT12L |
| 1290054 | Flexible tube R1T12 lg 1500 Ø 2 x EFT12L |
| 1290056 | Flexible tube R1T12 lg 2000 Ø 2 x EFT12L |
| 1290130 | Flexible tube R1T12 lg 3000 Ø 2 x EFT12L |
| A few references in 15 L: |
|
|---|---|
| 1290385 | Flexible tube R1T13 lg 500 Ø 2 x EFT15L |
| 1290376 | Flexible tube R1T13 lg 1000 Ø 2 x EFT15L |
| 1290387 | Flexible tube R1T13 lg 2000 Ø 2 x EFT15L |
| 1290378056 | Flexible tube R1T13 lg 2500 Ø 2 x EFT15L |
| A few references in 12 L: |
|
|---|---|
| 1290077 | Flexible tube R1T16 lg 500 Ø 2 x EFT18L |
| 1290087 | Flexible tube R1T16 lg 1000 Ø 2 x EFT18L |
| 1290089 | Flexible tube R1T16 lg 1500 Ø 2 x EFT18L |
| 1290091 | Flexible tube R1T16 lg 2000 Ø 2 x EFT18L |
| 1290112 | Flexible tube R1T16 lg 3000 Ø 2 x EFT18L |
| 2203593 | Speedy Purge |
| LS SPEEDY PURGE is a tool designed to fill and purge air from LS Hydraulic Steering Systems fitted on 5 to 15 metre boats. LS SPEEDY PURGE connects directly to the 12 volt boat battery with crocodile clips and to the cylinder and pump with 2 x 4 metre clear spiral hoses. Easily transportable, its 4 litre oil contents gives sufficient autonomy to bring 2 to 3 steering systems into service without filling up. Fill and purge is done neatly by one technician alone in less than 10 minutes, thus ensuring that SPEEDY PURGE is paid off with the very first steering systems. LS Speedy Purge is the ideal tool for shipyards with small series of boats or for installation or maintenance work at marinas. |
220383 |
LS Speedy purge – 12V – with 4 m extension hoses |
1206948 |
Set of 2 x 4 m extension hoses |
| 2200376 | Electrical By-pass NO 06 12 VDC 3/8 BSPP |
| 2201479 | Electrical By-pass NO 06 24 VDC 3/8 BSPP |
| 2200566 | Electrical By-pass NO 12 12 VDC 1/2 BSPP |
| 2201438 | Electrical By-pass NO 12 24 VDC 1/2 BSPP |
| 2200078 | Lock Valve on line LS 115 |
for pumps: 30 HB-without LV, 35 HB-without LV, 40 HB-without LV, 50 HB-without LV, 70 CT-without LV, 90 CT-without LV
| 2201138 | Adaptable Cone + pin Ø 22 – 2°30 angle |
| for pumps: 30 HB, 35 HB, 40 HB |
| 2200029 | Adaptable Cone + pin Ø 24.5 – 8° angle |
| for pumps: 30 HB, 35 HB, 40 HB |
| 2203369 | Dual Pressure Relief Valve |
| 2200803 | By-pass valve–flexible tube TS 6 |
| 2202496 | By-pass valve–flexible tube TS 8 |
| 2200027 | By-pass valve–flexible tube Ø 8 mm |
| 2200067 | By-pass valve–flexible tube Ø 10 mm |
| 2201058 | Pump Bezel |
| 2201753 | Bulkhead Strain Relief | |
| Suitable for all LS flexible tubes and all other flexible tubes with an outer diameter of 8 to 12 mm. |
| View or Download our Instruction Manuals and Catalogues here: | |
|---|---|
 | Catalogue Hydraulic Steering Systems for Inboard Motor Boats |
 | NOT-100 Installation and Bleeding of LS Manual Helm Pumps |
 | NOT-300 Mounting and Bleeding LS Outboard Cylinders |
| 2200804 Pump 20 HB with Lock Valve | ||
|---|---|---|
| Flow rate | 20 cc/t | 1.2 cu.in |
| Minimum size of tubing | ∅ 6 mm | 25″ |
| Weight | 2.8 kg | 6.17 lbs |
| Volume | 400 cc | 24.4 cu.in |
| Maximum Wheel diametre | ∅ 520 mm | 20 1/2″ |
| Dimension Drawing | ||
| Accessories for Pump 20 HB | |
|---|---|
| 2201989 | Set of elbow fittings for Ø 6 mm flexible tube |
| 2200807 | Set of straight fittings for Ø 6 mm flexible tube |
| 2200809 | Set of tees for Ø 6 mm flexible tube |
| 2200986 | S/Steel wheel Ø 400 mm |
 | Also Available in Tilt HB 5 version |
|---|
| 2201941Pump 60 CT with Lock Valve- 8° Sailing-Boat |
||
|---|---|---|
| Flow rate | 60 cc/t | 3.6 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 7.7 kg | 17 lbs |
| Volume | 1000 cc | 61 cu.in |
| Maximum Wheel diameter | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing for all models | ||
| 2201942 Pump 70 CT with Lock Valve- 8° Sailing-Boat |
||
|---|---|---|
| Flow rate | 70 cc/t | 4.27 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 7.7 kg | 17 lbs |
| Volume | 1000 cc | 61 cu.in |
| Maximum Wheel diameter | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing for all models | ||
| 2201857 Pump 90 CT with Lock Valve- 8° Sailing-Boat |
||
|---|---|---|
| Flow rate | 90 cc/t | 5.5 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 7.7 kg | 17 lbs |
| Volume | 1000 cc | 61 cu.in |
| Maximum Wheel diameter | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing for all models | ||
| 2200605 Pump 115 CT without Lock Valve – 8° Sailing-Boat 2201420 Pump 115 CT with Lock Valve – 8° Sailing-Boat |
||
|---|---|---|
| Flow rate | 115 cc/t | 7 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 8.4 kg | 18.5 lbs |
| Volume | 1000 cc | 61 cu.in |
| Maximum Wheel diameter | ∅ 1200 mm | 47 1/4″ |
| Dimension Drawing for all models | ||
| 2201421 Pump 170 CT without Lock Valve – 8° Sailing-Boat |
||
|---|---|---|
| Flow rate | 170 cc/t | 10.37 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 8.5 kg | 18.7 lbs |
| Volume | 1000 cc | 61 cu.in |
| Maximum Wheel diameter | ∅ 1200 mm | 47 1/4″ |
| Dimension Drawing for all models | ||
| 2200842Pump 70 CT without Lock Valve Double Bearing 2200711 Pump 70 CT with Lock Valve Double Bearing 2202189 Pump 70 CT with Lock Valve Double Bearing BR |
||
|---|---|---|
| Flow rate | 70 cc/t | 4.3 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 6.5 kg | 14.3 lbs |
| Volume | 660 cc | 40 cu.in |
| Maximum Wheel diametre | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing for all models | ||
| 2200814Pump 90 CT without Lock Valve Double Bearing 2200832 Pump 90 CT with Lock Valve Double Bearing 2201455 Pump 90 CT with Lock Valve Double Bearing BR |
||
|---|---|---|
| Flow rate | 90 cc/t | 5.5 cu.in/rev |
| Minimum size of tubing | 16×18 mm | .62x.70″ |
| Weight | 6.1 kg | 13.5 lbs |
| Volume | 660 cc | 40 cu.in |
| Maximum Wheel diametre | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing for all models | ||
| 2200194 Pump 70 HB without Lock Valve 2200088 Pump 70 HB with Lock Valve (*) |
||
|---|---|---|
| Flow rate | 70 cc/t | 4.27 cu.in |
| Minimum size of tubing | 10×12 mm | .39x.47″ |
| Weight | 7.5 kg | 16 lbs |
| Volume | 660 cc | 40 cu.in |
| Maximum Wheel diametre | ∅1 000 mm | 39 3/8″ |
| Dimension Drawing | ||
| Accessories for Pump 70 HB | |
|---|---|
| 2200089 | Set of straight fittings 3/8 BSPP Ø 12 mm |
| 2200102 | Set of tees for Ø 12 mm inflexible tube |
| 2200175 | Wooden wheel Ø 600 mm |
